|
Just a small piece of advice, it seems that the screws are able to have a much too large screwdriver than is needed. So if you will only use a smaller driver when it is put back and not one of those cordless screw drills that will over tighten them. Also make real sure that the correct screw is used as some are a different thread pitch that the others and can get cross threaded and will make it nearly impossible to get out again. They should all screw in by fingers, all the way.
Glad you got it out.
Dudelive
__________________
Be careful what you ask for, because you might just get it.
|
Hybrid Mode
