Tdk Drive Wont Read Cds After Changing To Master

[david42018]

I had my TDK-Cdrw drive set as the primary slave with my hd. I powered down and changed both the hd and slaves pins and gave the cd drive its own ide cable. The harddrive is set as the only drive on primary master. The cd drive is set on secondary as master with the pins set for master. Now when i try to run a cd, it says "The disk structure is corrupted and unreadable". Ive tried several cd's. It WILL READ Audio CDs but not data cds

[Sephiroth]

tried changing the ide cable?

[tubebuoy]

"I had my TDK-Cdrw drive set as the primary slave with my hd. I powered down and changed both the hd and slaves pins and gave the cd drive its own ide cable"

??? Why did you change the HD pin?

In this configuration the HD should be MASTER on IDE 1. The CDRW should be MASTER on IDE 2. Both units should be on the END of the IDE cables.

}---:?