BetaONE will rise again! - Tdk Drive Wont Read Cds After Changing To Master

BetaONE will rise again! (http:\\b1.hcanet.com\forum/index.php)

- Hardware Support (http:\\b1.hcanet.com\forum/forumdisplay.php?f=36)

- - Tdk Drive Wont Read Cds After Changing To Master (http:\\b1.hcanet.com\forum/showthread.php?t=6235)

david42018

11th Jan 03 09:00 PM

I had my TDK-Cdrw drive set as the primary slave with my hd. I powered down and changed both the hd and slaves pins and gave the cd drive its own ide cable. The harddrive is set as the only drive on primary master. The cd drive is set on secondary as master with the pins set for master. Now when i try to run a cd, it says "The disk structure is corrupted and unreadable". Ive tried several cd's. It WILL READ Audio CDs but not data cds

Sephiroth

29th Jan 03 02:36 AM

tried changing the ide cable?

tubebuoy

29th Jan 03 03:37 AM

"I had my TDK-Cdrw drive set as the primary slave with my hd. I powered down and changed both the hd and slaves pins and gave the cd drive its own ide cable"

??? Why did you change the HD pin?

In this configuration the HD should be MASTER on IDE 1. The CDRW should be MASTER on IDE 2. Both units should be on the END of the IDE cables.

}---:?

All times are GMT +1. The time now is 02:08 PM.