|
cowdirt is right. u cannot use your pri, sec, or any ata ide channels for the floppy. the only prob is, make sure you have your cable pluged in the right way. You would know this because, if it is wrong, the floppy disk light remains on always and never shuts off. If there is on the cable say a pin hole not there, just press the cable against the floppy driver pretty hard to punture a hole in the floppy cable (the Black Connector) I had to do it and didnt have a problem. Also make sure that power cable is plugged in sometimes its hard to see depending on the devices you have arond it and possible not all power wires are plugged in.
|
Threaded Mode
