Still after enabling DMA, I couldn't get the optimum performance.
I could copy a 187MB folder on a CD to the hard disk at below read speeds
40X max - 61 seconds
52X max - 49 seconds
(My CDROM can read disks at both these maximum speeds, it's a Sony CDU5211)
So that means I only could achieve 3MB/sec and 3.8MB/sec instead of 6MB/sec and 7.8MB/sec.
If the CD was written in a slow speed, does this slow down the read speed of the CDROM? I
think this might be the case.
Hmmmm?????????????
|