|
i'm sorry, but i'm not familiar with the k7t266. but i'll try anyway...
there should be a label on the hard disk showing what position the jumper should be in. there should be several options: master, slave, master w/ slave, etc... Just choose the option 'Master'.
The cdrw drive should be put on the second IDE channel and also set to 'Master'.
does your mobo has onboard RAID controller? if you do, check the manual for a jumper setting for choosing between ATA or RAID mode. choose ATA.
oh yess... in BIOS, choose 'autodetect' for the drive types...
see if those helped you
|