|
1) Forward port 113 to allow IdentD to work.
2) Setting up mIRC DCC
(Thanks to Patrick Fortin-Ducharme for providing this info!)
This is how to setup an IRC Client (Mirc 5.71) and the router (BEFSR41) to send/receive Files by DCC through the Cable/DSL router without using DMZ Host.
In Mirc :
1. Go to DCC, Options, DCC Ports (Assuming that you'll never send more than 10 files at times. If so, set "First" to a lower number.
a ) set "First" to 4990
b) set "Last" to 5000
c) Click OK, and Quit.
On the Router: (I suggest to use 1.33 BETA Firmware or a Firmware that support "Range of Port" in Forwarding)
Set port range to same ports as set above, and IP to the computer that you want to use mIRC DCC on.
|