Okay so here's the thing:
Recently acquired a Pioneer 16x DVD drive; installed it making it a slave to the burner. Then fired up the box and the BIOS said there was no drive - zero, nada! no hard drives, no CD drives. So checked to make sure the jumper was in the correct position to run as a slave - it was
Then tried running the drive by itself and set it as a master. Still said there was no drives.
Yes the power was hooked up correctly, the light went on.
Took back to the place I bought it and they tested it and it worked... so what could the problem be? Any ideas?
Athlon 1.2 ghz
512 RAM