|
Does your Mobo/chip set provide ANY graphix? If so,
1 Remove ALL plugin boards and plug your monitor into the monitor out on your mobo.
2. Double check your ram. It looks like your board has 4 ram slots. 2 for DDram and 2 for SDRAM. I would install 1 stick in the proper slot and start from there.
I just built my first PC. ASUS A7S-VM mobo and 1.1ghz Athlon. I had it working just fine until I started installing PCI boards. I installed my Sblaster and a modem and it wouldn't even boot! I have 4 PCI slots and it took me 3 freaking hours to find a combination that worked! I wound up installing the modem in slot 4 and the blaster in slot 1. Go figure!!!!
}---:?
|