BetaONE will rise again!

BetaONE will rise again! (http:\\b1.hcanet.com\forum/index.php)
-   Hardware Support (http:\\b1.hcanet.com\forum/forumdisplay.php?f=36)
-   -   Floppy problems (http:\\b1.hcanet.com\forum/showthread.php?t=439)

Bads 14th Oct 01 12:43 PM

Hello,

I have some problems with my floppy ;)

Sometimes I can put data on a floppy and sometimes, XP tell me the floppy is not formating and this is false because I have stuff in this floppy ;)

And when I try to format this floppy, xp said this floppy cannot be formated ?

What's happend whit this floppy ?

Thanks

-=[DaZliNk]=- 14th Oct 01 01:08 PM

Check that the floppy cable is the right way around.

The twist at one end of the floppy cable should be connected to floppy drive.

NOT the motherboard [img]smile.gif[/img]

Crowdirt 14th Oct 01 05:14 PM

Hi Bads 1, does the floppy work ok if you are using something other than Win 2K/XP, such as Win98? If so then the cabling is ok and the hardware is ok. I have found a problem something like this which has to do with machines that use the Intel 815 Chipset. See my Post further down the list here. Comments?

Bads 14th Oct 01 05:22 PM

[quote]Originally posted by crowdirt:
Hi Bads 1, does the floppy work ok if you are using something other than Win 2K/XP, such as Win98? If so then the cabling is ok and the hardware is ok. I have found a problem something like this which has to do with machines that use the Intel 815 Chipset. See my Post further down the list here. Comments?<hr></blockquote>

hello crowdirt

Thanks for your help,

I know this is not an hardware problem because sometimes the floppy works.

The floppy is not very old about 3 years and low usage.

I have no other OS to test it !

My motherboard is an Asus P3BF with a 440BX chipset.

Friday I have put some stuff in my floppy and all was working fine ??

Crowdirt 14th Oct 01 05:42 PM

Hi Bads 1, the issue I am working on is intermittent. Sometimes the floppy is ok, usually after a Reboot. Works ok for awhile and then wanders off. The problem is a combination of corrupted large files and format failures. We have lots of 815 Chipset machines at work, running Win9X with no problem. Win 2K/XP on the same machines are flakey. The 440 Chipset is from Intel and may have traces of this problem as well. We have our Hardware Vendors working on it and so far they have not found an answer.

Bads 14th Oct 01 05:45 PM

I have this one when I click on drivers details:WindowsSystem32DRIVERSfdc.sys

When I put a disk in the floppy I hear the sound and the led is flashing but I can't eplore the floppy or format it !!

I try to uinstall and reinstall the floppy and this is the driver found by XP

Bads 14th Oct 01 05:51 PM

Sorry,

This is the driver: WINDOWSSystemDRIVERSflpydisk.sys

Crowdirt 14th Oct 01 05:51 PM

NT/2K/XP format floppies differently from Win9X. The Boot Loader is different etc. I suspect it is something about the Floopy Driver but M$ does not have anything else available at the moment, Checked Technet etc. May have to wait awhile for a solution. If I find one will pass it along.

Bads 14th Oct 01 07:33 PM

Where can I find and old driver ?

Just the floppy driver

Thanks

just_do_IT 14th Oct 01 10:49 PM

Sometimes I get this type of problem with my cd rom - tells me that my disk is corrupted...i restart, then the disk reads properly...is this related in any way?


All times are GMT +1. The time now is 01:43 AM.

Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.